CommScope RUCKUS Community Forums

dawidku · 08-21-2023

We have 2 sets of stacked ICX7650 switches running firmware 08095j switch image and we have to change them to router image. I understand we have to go with the same version 08095j but I am not sure what else do we have to consider for this upgrade. W...

dawidku · 08-15-2023

We loaded image 10.0.10a on a core ICX7650 single unit switch (originally running version 08095j ), upgrade was successful and all settings converted OK from switch to router however most of the connected access switches (Ruckus, Cisco) lost connecti...

dawidku · 07-28-2023

Is it possible in SmartZone switch model configuration to somehow add range of VLANs at once i.e. VLANs 10-999 instead of adding each VLAN manually?

dawidku · 06-21-2023

Hello folksDo the ICX 8200 switches support auto upgrade via dhcp options/pxe ?Apparently on Cisco you can define the firmware so whenever it boots up, it gets the firmware and upgrades on its own?We have a tens of switches on order and auto firmware...

dawidku · 06-02-2023

HelloFew years ago I got hold of a Ruckus document I think called "Hospitality Best Practices Guide" with all the best / recommended WLAN and controller settings for hotels environment.Can anyone point me to this guide or updated version?

dawidku · 08-22-2023

Thank you BenSo no other possible issues due to the fact that switches are stacked?

dawidku · 08-15-2023

Really not what I was hoping to hear... So we have a config backup on SmartZone from the original 8.0.95j switch image.What would be the best procedure to change the firmware to 8.0.95j router image?We have following versions on a switch at the mome...

dawidku · 08-15-2023

We have all the remaining switches ICX8200 series running 10.0.10a... also SmartZone firmware upgrade allowed me to push this version so I went ahead with it.Are you saying we should now downgrade ICX7650 to 8.0.95j router image?What are the implicat...

dawidku · 08-01-2023

OK mistery solved.I have downloaded my files from the same location from Support Portal but seems I had them already in my downloads and those recently downloaded were renamed as you can see belowSo uploading these files with changed name caused the ...

dawidku · 07-31-2023

HelloI am getting the below error message when trying to upload 3.6.2 or 5.2.2 patch to client's vSZ144 controller.Upload patch failed. Reason: Upload AP patch general error. Fail to sync AP patchController is running following version: Can anyone ad...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX7650 in stack mode - switch image change to router image considerations

ICX7650 switch image to router image upgrade issue

SmartZone switch model configuration add VLANs range

ICX 8200 firmware auto upgrade on boot

Hospitality Best Practices Guide

Re: ICX7650 in stack mode - switch image change to router image considerations

Re: ICX7650 switch image to router image upgrade issue

Re: ICX7650 switch image to router image upgrade issue

Re: Can we upload 3.6.2.X AP Zone firmware on SZ-144 running 5.2.2.X or 6.1.1.X

Re: Can we upload 3.6.2.X AP Zone firmware on SZ-144 running 5.2.2.X or 6.1.1.X