ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ICX 7450 copy config by SNMP

Hello, i have ICX 7450-48 with firmware SPR08030u.bin and ICX 7450-24 with firmware SPR08095j.bin. In oldest firmware i can copy config over TFTP by this command:snmpset -v 2c -c <community> 192.168.0.1 1.3.6.1.4.1.1991.1.1.2.1.65.0 i 1 1.3.6.1.4.1.1...

PedroS63 by New Contributor
  • 800 Views
  • 1 replies
  • 0 kudos

Resolved! ICX8200 memory increasing by 1% every 6-12 hours

This may be related to an existing error found in the 1010b release notes: "memory increases over a long period of time."The memory utilization for one of the 8200s we have installed (we have 2 others that are not experiencing this issue) increases s...

Sydney_N by New Contributor III
  • 1799 Views
  • 4 replies
  • 0 kudos

Resolved! Assign VLAN Dynamic on Access Point and clients behind

Hello community, I have an issue and i need your help.I've deploy a mac authentication with an auth server Aruba ClearPass. I have a mac auth profile for my access point which, if auth OK, untaged my mgmt vlan and tagged my SSIDs VLAN. Until now, it'...

ICX8200 in Cisco Network

Hello I have a project where cisco will be partly replaced with ICX 8200 Switches. The new Core will be a 8200 FiberStack.Is there anything important what i have to consider at the uplinkports from cisco and ruckus?Spanning Tree is set to rstp and si...

Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.

Top Kudoed Authors