The FastIron 10.0.10b software image and release notes have been published on the RUCKUS Support Portal. The PM can share the following links with customers, partners, and employees as needed. RUCKUS ICX FastIron 10.0.10b (GA) Softwarehttps://support...
Hey Folks,is there special trick configuring Ethernet Ports in SmartZone v-SZe Controller?When i select a Port and click "Configure" we always get this error: What I am missing?RegardsPeter
Questions:Having two units in the stack, in output from snmpwalk query,We get .x.x.IfDescr.1Value = String Gigabit Ethernet 1/1/1further down in the output:We get .x.x.IfDescr.257Value = String Gigabit Ethernet 2/1/1Question is: Where is the re...
Hi,I have an ICX edge switch connected to Core using 802.1w. I need to uplink another extreme switch to the existing ICX edge switch. Vlan 900 is configured on the extreme switch this vlan has configured with spanning-tree 802.1w and stp for point ...
hi network master's, just had a unexpected issue here, im running 3 icx switch. L3 and two L2 unfortunately and strange reason my L2 went down for good as a temporay solution i used our old HP switch as L2 switch. my problem is im am not really famil...
