RUCKUS ICX Switch Family

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

dot1x configuration issue

Hi , i try to make dot1x configuration but i get this information. How to resolve it ? telnet@7450_B28-P1(config-authen)#dot1x enable ethernet 2/1/2Error - MAC-AUTH/Dot1x cannot be enabled on UNTAGGED port 2/1/2 on non-system default vlan telnet@745...

08.0.50 Or Newer Firmware For ICX 64XX Series

Are there plans to release any newer firmware versions on the ICX 64XX series? We really need some of the features that are in 08.0.50 and newer, but it seems that Ruckus is only releasing these on the 7XXX series switches.

Upgrade path for ICX7450 (currect version SPS08030e and SPS08030k

Hello,I'm planning to upgrade my ICX switches (I have a bunch of them). They are at versions 08030e and 08030k. I'm new in brocade technology and I'm trying to figure it out how to choose the version for the upgrade. I saw the last version 0807 is su...

ICX 7150 - dumb switch default password

I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, it wants a password which I never set. Suggestions?

Setting Router/Switch Code On Primary and Secondary

I have a VAR who setup an ICX-7450 and I'm interested in what the best practice is.He put router code on the primary and switch code on the secondary. He set it to always boot from secondary as that is where the config is.Is this as odd as it seems ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

1

1

1