cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 - dumb switch default password

clayton_taverni
Contributor
I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, it wants a password which I never set.  Suggestions?
10 REPLIES 10

BenBeck
Moderator
Moderator
Is it asking for a username/pw or just a password when you enable? If it is the latter that is from the 'enable super-user-password ' command. 
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

If I'm consoled in, I can get in and configure without a password.  Now I'm trying to do the same thing remotely and it wants a password.

I'm guessing that I should have set a password when I was grabbing the IP address.

Just double-checked. No default username/password for SSH. Need to do the following:
conf t
username password
aaa authentication login default local <--could use other things here such as radius, tacacs, etc.
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

Thanks.