Welcome to the RUCKUS Pack! The RUCKUS Networks Community is a place to ask questions, resolve issues, learn, exchange ideas, and connect with your peers. The Pack includes a diverse range of members who are passionate about sharing and collaborating...
We are able to capture the switch command and log in the Ruckus Web auth via Clearpass now.But there are some minor issues and might be related to Ruckus itself.Please advise if below issues might be adjusted via Ruckus switch CLI:If I log out and lo...
Hello,I want to use my own ssh key.I uploaded my own rsa key with 2048 bits with tftp. ip ssh pub-key-file tftp key_rsa2048.puband show up client-pub-key returns---- BEGIN SSH2 PUBLIC KEY ----ssh-rsa ....---- END SSH2 PUBLIC KEY ----And my verbos...
R500 using solo firmware 104.x.x, AP able to ssh and set scg, SZ100 is using firmware version 3.6.x.x , only a few AP start with mac-address d4:68:4d:xx:xx:xx can't connect, others AP with different mac-address can connect.
Hi Guys,I am researching on the API call to fetch the bandwidth being used on a particular SSID. We are testing with the smart zone 100.In the API, I saw that we can use '/operational/client' that outputs the client [fromClientBytes] and [toClientBy...
The cli documentation says that in config-ap mode one can enable ipv6 with 200.7 unleashed firmware. ( I have a R510 (200.7.10.202.92) and ipv6 is no recognized command. According to the cli guide, the command would be "ipv6 enable mode auto" Is a...
