ZoneDirector 10.1.2.0.318 (MR2 Refresh7) SNMP MIBs (ZIP)

[ETO]

Hi.

I update my ZD1200 to latest software that I can run for my AP's 10.1.2.0.318

I found also this file in downloads https://support.ruckuswireless.com/software/2761-zonedirector-10-1-2-0-318-mr2-refresh7-snmp-mibs-zi...

How can I install this one? Or should I just unzip it?

Thank you.

[Vineet_nejwala]

@ETO 

You can upload the ZIP file to your monitoring tool and it should work.

Best Regards

Vineet

[ETO]

@Vineet_nejwala 

Thank you for answer.

Can you please let me know which monitoring tool did you mean?

I tried to check on ZD1200 interface on website but didn't find any thing.

See picture if is in any help?

Do I even need to upload this file or it will work fine also without it?

[ETO]

[Vineet_nejwala · Accepted solution]

Hi @ETO 

These are only needed when you are using an SNMP tool to monitor certain information (snmp traps and polling). Simple Network Management Protocol (SNMP) is a set of protocols for managing networks. SNMP sends messages to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Are you using SNMP ? If not you can ignore the SNMP MIB as they are of no use to you.

Below some article to help explain SNMP :

https://support.ruckuswireless.com/articles/000007319
https://support.ruckuswireless.com/articles/000004129

Best Regards

Vineet