hi admin and all friendsi got problem with R310 ap...all server/controller ip already put via putty...after the ap is up...i cannot see it in my zone controller...other r310 working fine.. ..only this 3 ap is problem attach the pic below..pls help...
I have a Ruckus R320 configured and working. It acts as a wifi end point (no DHCP). I know its ip address but when trying to connect to this ip I just get an unreachable message. Ping is working and I can connect via ssh. Thanks
Hi, I have inherited a network with 4 R320 AP's. I'm completely new to Rukus products so I am after some pointers on where to start.It looks like the configuration is somehow corrupt and I need to gain control and reconfigure to new SSIDs etc. The un...
I have a system using two R510 access points. I have configured two WLANDS.WIFI 2.4WIFI 5GHZThere are approximately 42 devices connected. The system has run since 2018 with no issues. Within the past few months 5 or so devices are disconnecting an...
Hi!I need oids to give me the info about temperature, fan, power, storage etc. When I try to snmpwalk, device does not turn any instance about them.snmpget -v2c -c name 10.1.182.111 .1.3.6.1.4.1.25053.1.1.2.1.1.1.10 RUCKUS-HWINFO-MIB::ruckusHwInfoTem...
