Hello i need to set up an AP with two WLans one should be in the Vlan 10 and one in the Vlan 192 but i dont get what i do wrong. In this Picture you can see my configureation.Wlan1 should get the ip-adress by Server 1Wlan2 should get the ip-adress by...
After performing an upgrade for ZD, i.e. 9.8 to 9.9, how can I find out that all connected APs were upgraded properly?The "Export to CSV" function found on the Monitor page does not include this information.
Hello to all, I have a question I would like to ask... The 7731 wireless bridge is, according to the specs, able to handle multiple VLAN instances. Lets say that I want to create a bridge that will connect two buildings together... By configuring my ...
We have a lot of iOS clients on our wlans and I'm wanting to know if there is any reason NOT to enable 802.11r and k on these wlans? (we have ZD1100 running 9.9.1) Is there any downside or negative effect I'm not aware of? I'm always wary of settings...
Hello,i have a question, for what i understood so far the load balancing of clients between AP's is based on the RSSI when a client see that is a better level switch for a near one. But i watched sometimes i have some AP's that achieve the maximum of...
