In looking to update our Clients stand alone AP's, I see that there is a "recommended" firmware listed, which is usually not the latest. Is this what I should use, or should I use the "latest"?
Hey, Is it an simple way to configure the AP VLAN settings through CLI? Otherwise the only (?) option is to first do an factory reset and then configure the AP again?
I want to set both bands to use 802.11n only, but there is no option to do so.You can see in this screenshot for the 5G radio, the only option is a/n. On the 2.4 radio, the only option is b/g/n.How can I set it to N only?I am running 9.8.3.0.14 on a ...
Good Morning,I'm wondering whether we have to update our P300-Bridges because of the "old" AP-Certificate. As I can see, it's mentioned that only SmartZone and virtual SmartZone is affected by this. Standalone APs and APs managed by ZoneDirector won'...
Hello I have a 7363 AP and what I would like to do is assign a vlan ID for the ethernet port to the vlan of the network that clients use instead of the management vlan of the AP's. Is this possible if they are connected to a zone director? Basically ...