zoneflex r500
dropping signal, just updated to latest firmware and my R500 keep cycling the wifi signal/dropping out. even with no wifi devices connected. Using R500 as a stand alone device.
Forum Posts
my spectrum analisys doesnt work
Hello i have a ZD3000 that is behind a NAT with a public ip and the AP's are in different LAN and gateways.. till here everything fine all works, but when i try to use the option of spectrum analyse i don't get data.. it says is monitoring but i don'...
multiple R310 APs for 1 network
Hi, I would like to know if it is possible to use 4 R310 APs (in different rooms) to create 1 SSID for office employees to access the entire network and 1 SSID for guests for Internet access only. Do I need an additional ZoneDirector for this? Whe...
enabling DHCP server on standalone AP
Hi,I want to enable DHCP server on an R310 AP, the AP has a static IP address of 10.20.1.5, subnet 255.255.0.0. I know I need to enable a local subnet to enable DHCP, but am not sure what to use as 'local IP address' & 'Subnet mask' on the subnet ent...
Secure AP Image Upgrade on ZoneDirector platform
I've just done my first firmware upgrade on our SR ZD3000's with Secure AP Image Upgrade enabled and after over an hour less than a third of the ~200 AP's had upgraded. All the rest were reporting upgrade failures and retrying. After that I turned Se...
Related Self-Help
