RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ruckus T300 (Unleashed) 2 APs sharing same SSID

How to setup 2 Ruckus T300 (Unleashed) sharing same SSID, instead of having a Master & Standby AP mode. I would like to have both AP to broadcast at the same time due to location layout... Any suggestions is greatly appreciated!

Ruckus Unleashed Slave AP is not conncet.

Good morning.The AP is operating the master. You can not connect another AP in this state. The symptom is that other APs are displayed on the Master AP management page. But the state is disconneted. Could you tell me why?This is what I did.1. Full AP...

Download firmware 3.1.2.0.150 for ZF7343

Hello,There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller. Thank you very much for the help

SmartZone100 firmware 3.5.0.0.808 /Ruckus ZoneFlex 700 firmware 3.5.0.0.1333

SmartZone100 is unstable after upgrade with firmware 3.5.0.0.808, Its always down once in a while. Any other solution on this issue? It is a firmware issue on SmartZone100? or on Ruckus AP?

How to rejected channel overlapping if found another WiFi use channel bonding (ch 4 & 8) ?

Hi Guys, Currently we use zd1200 and R500 on our office and activate channel fly Radio 2.4Ghz(1,6,11), we founded on someone WiFi use channel bonding (ch4 & 8). Thats why the impact to us is channel overlapping and some of employee always complain of...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

2

1

1