I've just gotten a Zone Director 1200, and 20 R510's. I have (my "old" WAP's) 15 7363's that I'm replacing. Problem is, the ZD 1200 "grabbed" the 7363's (yes, I went through the setup a little too fast, without enough reading comprehension... my fa...
End user here, purchased and set up a ZD1200 myself along with three R710 APs. The license I got worked for up to 5 APs, so far so (very, very) good.The initial period (90 days?) of firmware updates is long gone and I'm looking into buying the right ...
There is a requirement that when they connect to the SSID the captive portal will pop up immediately rather than waiting to type any URL through browser and a small delay in login the captive portal. Is it possible to open external captive portal onc...
I try to upgrade to 9.7.2.0.32 from 9.7.1.0.17, the ZD1100 controller can upgrade to 9.7.2.0.32, but the Zone Flex 7982 was failure to upgrade to 9.7.2.0.32.Then, I prepare to following the upgrade path.When I find out the 9.7 release versionI cannot...
There appears to be a bug with timezones in the AP's connected to a SmartZone controller. If you have the timezone of a zone set to anything except GMT, there will be log entries every 90 seconds that say the following:wsgclient/timezone value too...
