RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ruckus 7372 not turning on with properly rated AC adapter?

I have a Ruckus 7372. Can't seem to get it to turn on using any AC adapters I have. The label on the back says 12V-1A... Well, 12V-1A doesn't work, 12V-1.6A doesn't work... does it need something beefier? I have a 12V-20A bench supply that it does wo...

Virtual Smart Zone -High Several AP firmware

Hi,In the platform Ruckus VSZ-H there is the possibility to load several firmware to support old AP(Example: ZF7343). In the literature says that each zone can have a firmware. Any information or link where you can find help. Best Regards

R300 wrong firmware

Hi there, I have a r300. I wanted to use the AP as an standalone. But I used the wrong firmware model. Now the AP is rebooting and all the leds are on. I have tried to reset the ap. But it didn't work. Also I can't connect with the web inte...

Migrating from ZD1100 to ZD1200 with a few new AP's

I currently have a wireless network with a ZD1100 and (12) ZF7982 AP's. Im looking to swap out the ZD1100 and put a ZD1200 in it's place. In addition, I need to replace one of my ZF7982 AP's with an R710.I understand that I need to get the ZD1100 a...

Cant get IP from DHCP through Wireless AP's - ZoneFlex R600 Dual Band

Hi, we have 2 ZoneFlex R600 dual band AP's (9U1-R600-XX00), we are not using DHCP on the access points, but the border router is doing DHCP. Most mac's, iphones and windows devices work fine. We have a handful (about 5 out of 70) machines that just c...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

2

2

1