RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Mesh APs not working after a Failover

Good day! Our topology consists of two Zone Director 1200 : One as a primary and the other one as a secondary. Ive configured the smart redundancy in both controllers, making the primary active and secondary as a standby. We have wired aps, that are...

vSZ-E with R510 - Maximum clients

Hello, based on KBA-4666 I would like to know if anyone knows the values for R510 which doesn't appear on the table. I have a Virtual SmartZone Essentials with R510 APs, is that table applicable on this scenario?

[960 License threshold exceeded][AP Capacity License] limit reached at [90%].

Im new to the Ruckus environment, i tried doing a search and nothing came up.The previous employee left this solution with 2 AP's setup. I'm trying to setup the rest of them with limited knowledge.Smartzone 100 using Zoneflex R610 AP'sDoes this have ...

zf 7762-s stand alone configuration

HiI have a ZF7762-s AP, which I upgrade it with firmware 9.8.3.0.14 for stand alone purpose,but the option wireless where I can configure new SSID didn,t appear.

Why do R720 POE Port show two MAC addresses?

We have a NAC solution on my network and I recently deployed a few R720's. I noticed that all ports where the 720's are connected show two MAC addresses. I compare the MAC address entries for all other AP's and they all show one MAC. Port Gi1/0/44...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1