RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Somewhat Tech Knowledgeable need help setting up Wlan after reset

I had to reset my ruckus router (long story), now I went through the setups to setup my WLAN but now I have to walk upstairs near the AP to connect to the WLAN and it says no internet. I have a AT&T modem, Ruckus Router and two APs. Please help.

H510 - SSIDs isolated to individual switch ports

I've seen similar questions asked, but this is a bit of a unique setup.I want to be able have 4 SSIDs, we'll say 1-4, SSID 1 is isolated to port 1, SSID 2 to port 2 and so on. The goal being that if a client connects to SSID 1, they can only travers...

Good day! New access point R720 untied. It does not load, the PWR LED is permanently lit in red.

Good day! New access point R720 untied. It does not load, the PWR LED is permanently lit in red.

Help me explain please

Hi guys, please help me explain about : 1. What is the cluster ? 2. What is cluster function ? 3. Can access point connect or join with controller if it located at branch site ? Thank you

Can an R720 run at full power by decreasing antennas on PoE+, and what is the range difference between PoE+ and PoH?

I'm looking at the spec sheets for the R720 and it states that on PoE the 2.4Ghz radio is in 1x4 mode at 18dbm per chain, at PoE+ it is in 4x4 mode at 18dbm per chain, and at PoH is in 4x4 at 23dbm per chain. I have a PoE+ switch, and range is much ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1