RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

How much time Smart Zone 100 needs to boot/to start working after power failure?

I configured two smart zone controllers to work in a cluster. Was checking out how fast (or slow) it will boot up/start working after power failure. It is suspicious because it takes too long (10-15min) to boot up and start working. Also, two control...

What is the best solution for home?

Which series and AP's is the best for home and SMB? Not very large territory with a lot of glass, partitions, clothes, may be pipes, refrigerator etc.

R510 Unleashed Clients no getting IPs from DHCP

There is an r710 connected to the same switch and doesn't have the same problem. When I assign a static IP to the client there is still no network access. The only thing that works is enabling 'randomized MAC' on the client, that way it gets an IP fr...

Rogue DHCP Server Detected

My R610 Unleashed AP is detecting my DHCP Server as rougue on both VLANS. The R610 is the master AP (no other APs) and has a static IP address, APs DHCP server is not enabled. Beyond disabling rogue dhcp detection, is there any way to mark these addr...

Ruckus R500 with firmware 2.6.0.0.370 connect to VsZ with version 5.2.0.0.685

Dear All Master,we have problem with our AP Indoor, we have Ruckus R500 with firmware 2.6.0.0.370 connect to VsZ with version 5.2.0.0.685, in now cannot register to VsZ, anyone can help me to solve this problem.Regards,Fahrizal Z

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1