RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
I installed the standalone firmware on a R700 AP that was running the Zone Director firmware. Now the DIR light on the AP is blinking green. How would I stop the DR light from flashing with the standalone firmware installed?
Hello, I recently moved into an apartment where they are using R510's to provide internet. So far the performance is less than adequate for gaming what so ever, constant disconnects and ping spikes. I was wondering if I could take the PoE ethernet ca...
I've got a small business network using an R500 running as an Unleashed manager (on version 200.7.10.202.118). One of the WLANs on the Unleashed config is an experimental IPv6-only network which uses NAT64/DNS64 to get to external IPv4-only sites, a...
Hi,I have 3 R700 APS with no ZD.Have tried several sw releases but currently running 100.1.0.0.432 as this has the highest throughput in WIFI and LAN. running IPERF3 while replacing two APS with PCs give me:Server listening on 5201-------------------...
Hi AllI have Configured Rockus R510. Firmware: 200.8.10.3.278. Added another Rockus R500 Firmware: 200.7.10.202.118. I am unable to configure added R500. Check image: R500 is now EOL i know but any chance to configure together? If not how configure i...
