RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

zf7372 APs sending LLDP request for 130W of PoE Power to Switch

I have four zf7372 APs connected via CAT6 to a ProCurve 5406 switch. The switch has 275W of PoE power available, and in total only has five PoE devices. Switch ports are 802.3af PoE only, no 802.3at PoE+.When the 7372 APs first power up the switch lo...

Is there a neat way to "stand" and Access Point like a ZoneFlex R720 or H510 on its side on a surface

Hi there. For various reason, I may want to stand one of my APs (Probably a ZoneFlex R720) upright to project the signal out of a window so I can reach some exterior IP cams. I would like to do this on a 5ft high surface next to the window. Is the...

Picking the right Ruckus ZoneFlex Access Points to go with my new ZD1200

HI there. Have had a lot of help here with my new network plans (thanks Diego!). Now down to selection of right Ruckus Access Points. These won't be wall or ceiling mounted, but will sit hidden away where convenient (under desks, on sideboards etc) ...

Will a new ZD1200 work with ZF7363, R500 & T300 AP's using 9.10.2.0.84 ?

My current zd1100 has failed after a power spike to my building, if I buy a new zd1200, will it work with my existing 7363, R500 and T 300 AP's using F/W 9.10.2.0.84 that's what was running on the old 1100 ?I know there is newer F/W for the 1200 but ...

R710 Can't connect to web gui or ssh

Hi,I'm having trouble connecting to an R710 so that I can configure it. I can't connect to the web gui or via ssh. I also can't connect to the access point's "Configure-me.xxxxx" SSID.Setup:PC -> (Data In) PoE Injector (Data Out) -> R710 (PoE port)PC...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1