RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

ZF7982 from a SZ 3.6 back to Standalone Firmware

i am unable to Flash the old ZF7982s that ive replaced in my network back to the standalone firmware they are currently on 3.6.1.0.354 and i want to use them as standalone elsewhere ive tried to put these firmwares on zf7982_9.7.1.0.17.BL7 and zf7982...

Poor signal to 1/3 of devices

Hi. I’m new to Ruckus and don’t know to much. I have 3 R550’s running Unleashed in a 3500sq foot home. I setup Unleashed as Mesh, not sure if that was a mistake. All 3 R550’s are hardwired to the router. About 1/3 of my devices show a poor signa...

r710 wont sync to ZD1200

I have an r710 (software: 100.2.0.0.336) that sat for 2 years before I found it. The site has 18 existing r710s and is licensed for 20. When connecting to the ZD1200 controller (software: 10.2.1.0 build 159), the new AP reboots constantly, leavin...

Can I get notification when an AP goes down?

I want to get email notifications if an AP goes down or overloaded with traffic. Is this feature available on Unleashed? I thought I found it under Admin & Services->Administration->Network Management->Alarm Notification but did not work for me when...

Can you use the R510 as a switch?

Hello, I see the unit has 2 network ports. I know that if I connect the POE network cable to it, it is able to get DHCP and work as an AP. We have one mounted in a hard to wire room and if we could connect a network cable to the second port and ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

1

1

1