Hi PG,
I don't think in standalone mode there is an option to disable LED. It is only available when AP is managed by controller.
Below is the AP's DIR LED behavior.
- Off: The AP is not being managed by a controller (Standalone mode)
- Green: The AP is being managed by a controller
- Slow flashing green (one flash every two seconds): The AP is managed by a controller but is currently unable to communicate with it.
- Fast flashing green (two flashes every second): The AP is managed by a controller and is currently receiving configuration settings or an image update.
Make sure there is no controller IP set on APs configuration.
Run below command to check if controller IP is configured.
get directoror
get scgIf you find an IP is configured, please delete it by running below command.
get director ip delrebootor
set scg ip delRegards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn