RUCKUS Indoor and Outdoor Access Points (APs)

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Red Power LED after Upgrading 7055 Firmware

I recently update the firmware in a Ruckus 7055 AP to ver 104.0.0.0.1347. Ever since, the power LED in the Access Point is solid Red after the AP has booted up. With the old firmware, the Power LED was green after boot up. Otherwise the AP seems t...

R750's 2.5G ethernet port not working

The 2.5G POE port is plugged on Zyxel XS1930-12HP switch. The switch supports 1G/2.5G/5G/10G, and POE++. The problem is that it is unable to negotiate with the switch at 2.5G speed. I already tried to set the switch port to auto-negotiation or force ...

Joanne

My 510 is stuck in an upgrade loop ..I have 3 access points on my setup and 1 is brand new. however the company I bought them from is not answering any calls and one of my boxes can’t join the network even though it’s showing as being there. please c...

outdoor 610

hi everyone, i have outdoorT610, was working fine so when I left company for some days off, the operations team have accident when them trying cut the tree...the tree dropped to device T610, device is looking fine. so there problem with t AP is worki...

Unleashed and FIPS compliance

I have a couple R610s for a small business I support. Is it possible to run the Unleashed firmware and have the devices be FIPS 140-2 compliant? Or do I need a Smartzone controller to talk to the AP's to ensure FIPS compliance? Also, this is unrela...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1