CommScope RUCKUS Community Forums

Richl · 02-21-2023

On the Web Interface of the ICX7250 The Last Tabs haveTFTP ConfigurationTFTP ImageCan I Perform a Backup of these for one Switch and Restore to another?If so would I need to Specify an exact Filename or would a restore Place the File in the Correct P...

Richl · 02-15-2023

How can I enable the uplink ports from the console

Richl · 02-23-2023

Hi I have read the Guide and it tells me no more than I know now - I have saved backup files to my TFTP Brocade BNA Server - What I want to know is can I load this file to another Switch running the Same Firmware release. If I can do this it would s...

Richl · 02-21-2023

HiSps08030r.binsw:version 08.0.30rT211boot 10.1.06T215 spz10106

Richl · 02-20-2023

Unit 1 failed and was not replaced into the stack as the Firmware of the sent unit was 09 x and it would not be excepted into the stack Unit 3 is the one in the mess now Unit 2 did not have a connection to the Network as it had only a 2 port POD lice...

Richl · 02-20-2023

Hi All was Fine before starting the upgrade apart from Unit 1 Missing From the StackHere is the Story of the Upgrade process:This was an upgrade on a 3 Switch Stack using a Manifest File via our Brocade BNA Server using its TFTP Repository. The Stac...

Richl · 02-18-2023

Hi no lights on the port and the port is “down” the switch that had the uplink now says it has no configuration and I have tried to reset it on the front panel and this does not work. Having applied an 8 port POD it thinks the speed is 1gb so it won’...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Take Backup and restore onto another ICX7250

Icx7250 firmware upgrade now no uplink ports live

Re: Take Backup and restore onto another ICX7250

Re: Take Backup and restore onto another ICX7250

Re: Icx7250 firmware upgrade now no uplink ports live

Re: Icx7250 firmware upgrade now no uplink ports live

Re: Icx7250 firmware upgrade now no uplink ports live