CommScope RUCKUS Community Forums

Hiro · 10-28-2024

Hello everyone, https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Slow-downlink-for-the-R650-registered-in-vSZ/m-p/98420#M5722In a different route than the previously mentioned topic, the issue of slow downloads on the R650 has ...

Hiro · 10-15-2024

Hello everyone.We are always very grateful for your support.Regarding the issue we've encountered this time, I searched the forum and found another similar topic: https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Fixes-in-Janua...

Hiro · 01-08-2024

Hello everyone.Thanks for all your help. This time, to add a new AP H350,I plan to update the firmware. Our current configuration is as follows vSZ-H controller ver 5.2.2.0.1563 R700 (ver 3.6.2.0.795)H510 (ver 5.2.2.0.301)R650 (ver 5.2.2.0.2069) We a...

Hiro · 05-11-2023

Hello everyone.Thank you for all your help. I have been experiencing the following symptoms for several weeks. When I check the traffic information on the APs registered with vSZ-H, there are times when the values for traffic and number of connection...

Hiro · 04-02-2023

Hello everyone. I would like to know if anyone knows anything about this.I am currently managing a zone with an R700 registered to vSZ-H.I recently updated the controller firmware as follows.5.2.2.0.317 -> 5.2.2.0.1563At that time, the R700 with AP f...

Hiro · 10-16-2024

Everyone, while I appreciate the various solutions you suggested, I have resolved the issue in my environment.For those experiencing similar phenomena, please refer to the following.In conclusion, the cause was noise due to alien crosstalk.The use of...

Hiro · 10-05-2023

Thanks for the reply, syamantakomer.I assume that the APs are congested, so I have turned off the loaded auto-tuning function and extended the interval to measure.We are still verifying, but the condition seems to be good.sincerely.

Hiro · 04-03-2023

Hi Sanjay, thanks for the tip.I checked with this controller and DB Persistence is not checked.Would this be improved by adding this check?If so, I have a concern.Similarly in another R650 zone I am creating, DB Persistence in Crient is turned off, b...

Hiro · 04-02-2023

Hi SanjayYou are correct.As of 5.2.2.0.317, all event logs were visible from the controller.The AP firmware at that time was 5.1.1.0.624 and we have not updated it until now.

Hiro · 04-02-2023

Hi Sunil, thanks for the tip.Before updating the firmware, the version of the R700 was 5.1.1.0.624.The zone was left in place, so I moved the R700 and ran reindex-elasticsearch-all, but unfortunately the situation does not seem to have improved.If th...

CommScope RUCKUS Community Forums

User Statistics

User Activity

One of the reasons for the slow downlink of the R650.

Slow downlink for the R650 registered in vSZ

Please let me know the appropriate firmware.

Traffic information is missing.

Some of the R700 event logs are not visible.

Re: Slow downlink for the R650 registered in vSZ

Re: Traffic information is missing.

Re: Some of the R700 event logs are not visible.

Re: Some of the R700 event logs are not visible.

Re: Some of the R700 event logs are not visible.