I would like to know if anyone knows anything about this.
I am currently managing a zone with an R700 registered to vSZ-H.
I recently updated the controller firmware as follows.
126.96.36.199.317 -> 188.8.131.52.1563
At that time, the R700 with AP firmware 184.108.40.206.624 no longer kept event logs regarding client connections.
I then updated the AP firmware on the R700 to 220.127.116.11.795, but this did not improve the situation.
I can see logs such as AP config updates and reboots.
I can connect to the AP and control it from the controller, so there is no urgent need to take action, but it is inconvenient as it is.
Any tips would be appreciated.
Solved! Go to Solution.
So post upgrading from 18.104.22.168.317 -> 22.214.171.124.1563, you are not seeing the events for client connection and disconnection?
If yes, this is not an usual behavior since there is no changes with regards to the Event logs parameters.
Under Events & Alarms >> Events >> Events Tab >> I hope there is no "Filter ON" is selected>>
Under Events & Alarms >> Events >> Events Management >> Events >> Search for key word "client" and make sure "DB Persistence" is selected,
Can you share the screen show of this.
R700 support till 126.96.36.199.x.x version.
If you have ever controller upgrade to 5.1.2 then you could create a zone with 5.1.2 version and move few R700 AP's and check behavior.
Please perform re-indexing and check if it makes any difference.
LAB1# debug LAB1(debug)# reindex-elasticsearch-all Start to reindex ElasticSearch, may need few minutes... Successful operation
Hi Sunil, thanks for the tip.
Before updating the firmware, the version of the R700 was 188.8.131.52.624.
The zone was left in place, so I moved the R700 and ran reindex-elasticsearch-all, but unfortunately the situation does not seem to have improved.
If there is another way, please let me know.