CommScope RUCKUS Community Forums

rahul_chakravar · 06-07-2023

Where can I find some documentation on how to downgrade the switch firmware from 09.0.10c to the recommended 08.0.95j release?I have issues with 802.1x implementation so I'd like to downgrade my firmware in the Dev environment.

rahul_chakravar · 07-06-2022

I've got a Wired 802.1x implementation with a ruckus switch as the Radius client and a Microsoft NPS acting as the Radius server.The below config line on the switch is the one causing me a lot of grief and I see a constant error showing up on Event V...

rahul_chakravar · 05-31-2022

I've put ports 1/1/1-1/1/5 Untagged and they're assigned to a vlan 10 that I created.Now when i run the command,dot1x enable ethernet 1/1/1, it errors out in:Error - MAC-AUTH/Dot1x cannot be enabled on UNTAGGED port 1/1/1 on non-system default vlan.D...

rahul_chakravar · 05-16-2022

Is there a CLI command to Power off my Ruckus ICX 7450 switch?

rahul_chakravar · 02-20-2022

ICX-7450Just created a pool and when trying to Active the pool, I run the "deploy" command, and this errors out for some reasonError:----------------------------------------------------------------------Invalid input ->ip dhcp-server pool vlan10dhcpT...

rahul_chakravar · 06-07-2023

Yep, that's exactly what I was getting on a pcap too. I'm inclined to downgrade the firmware now since it's a Dev environment.

rahul_chakravar · 07-25-2022

Opened a case, then your licensing team asked for S/N etc. and then no technical help was provided as apparently, this is classed under "technical assistance" which is not covered by a Lifetime Limited Warranty.Is there no other way to raise bugs for...

rahul_chakravar · 07-18-2022

Will do, thanks

rahul_chakravar · 07-18-2022

I was running 09.0.10 and have now patched it to 09.0.10c but still no luck. Can still see the errors on Event Viewer on my NPS.

rahul_chakravar · 02-21-2022

I seem to have posted this on the wrong board. Does anyone know how I can move this to the Switches board instead?

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX 7450 firmware downgrade process?

Disabling status-server (Code field 12) on a ruckus icx 7450 switch

ICX 7450 - 802.1x vlans

Turn Off the switch using CLI - ICX 7450

"Deploy" command doesn't work [DHCP pool]

Re: Disabling status-server (Code field 12) on a ruckus icx 7450 switch

Re: Disabling status-server (Code field 12) on a ruckus icx 7450 switch

Re: Disabling status-server (Code field 12) on a ruckus icx 7450 switch

Re: Disabling status-server (Code field 12) on a ruckus icx 7450 switch

Re: "Deploy" command doesn't work [DHCP pool]