CommScope RUCKUS Community Forums

vesalius · 02-11-2023

The default for Flooding of Unregistered IPv4 Multicast Frames changed from enabled to disabled between 8.0.95 and 9.0.*, and the documentation page title does not accurately reflect that change.8.0.95 Disabling the Flooding of Unregistered IPv4 Mult...

vesalius · 07-28-2022

Any plans to add a thread radio to the IoT module? Similarly, can the current 802.15.4 zigbee radio's in this module be converted to Thread for use with Matter? Thread is the future, IMO, and with thread 1.3.0 your AP's would be well positioned as gr...

vesalius · 01-18-2022

Haven’t seen anything in regards to resolution of the known issues listed below in either of the 200.11 or 200.12 release notes. Are they still present or resolved with 200.12? 200.10 - iOS devices that support 802.11r and WPA3 cannot associate t...

vesalius · 01-23-2020

The option for 802.11r FT roaming on wlan disappears under WLAN->Advanced->Radio Control if/when I select either WPA3 or mixed WPA2/WPA3 encryption on a wlan. Is that expected behavior and is there a workaround?

vesalius · 11-16-2023

Well the new Ruckus r770 support (or has planned support for thread over Matter) per the data sheet. Likely locked behind a large license fee, buts it's in the specs.r770 Datasheet

vesalius · 08-06-2023

I was only offering some solutions to OP that worked for me in the past. I don't have issues or logs to share on this one.

vesalius · 08-06-2023

using Channels beside 1,6 or 11, So Channelfly or background scanning and having AP's shift channels too frequently. Inexpensive IoT wifi soc's are not sophisticated.Having directed-multicast on.too many AP's or too few AP's

vesalius · 05-24-2023

Not sure those commands are necessary. You can show that qos directed-mcast is disabled for each lan port of your AP:ruckus> enable ruckus# config ruckus(config)# ap-group "System Default" ruckus(config-apgrp)# qos igmp-query v2 ruckus(config-apgrp)#...

vesalius · 04-18-2023

Has happened to me at least twice, using 09.0.10e and 09.0.10d on a 7150-48zp, as well. Just reloading worked one of the times. First time it happened on 09.0.10d was when I upgraded to 09.0.10e via USB.

CommScope RUCKUS Community Forums

User Statistics

User Activity

FastIron 09.0.10e Multicast documentation wrong

Thread radio

Unleashed 200.12 release questions

Unleashed 200.8, WPA3 and 802.11r FT Roaming on wlan

Re: Thread radio

Re: 2.4Ghz Devices Continuously Dropping Out

Re: 2.4Ghz Devices Continuously Dropping Out

Re: How can I enable IGMP V3 on a R550 Unleashed ?

Re: Ruckus Switch CLI Error