Hello Helbastawisy,Greetings!As per the images, seems like SYS light is amber that means that the switch is stuck in boot mode. You need to access the switch via console and try to boot the primary or secondary partition like this: boot_primary or bo...
Hi Manjukusam,Greetings!Seems like the switch is stuck in boot mode. Kindly try below:1-Please try to disconnect from the Power outlet the ICX-7150 and reconnect it.2-Please try to press the reset button using a paper click or a small stick Remove po...
Hello CarlosMST, Greetings! Upgrading licenses on the Ruckus ICX 7150To upgrade from a 2X10G license to a 8x10GR license, perform the following steps as shown in the example below.Place a purchase order with Brocade order management.Enter the show ve...
Hello Thuertas,Greetings!As per the description we understand that you are trying take access to 7150 switch CLI. If via console port below is the procedure. How to console to the switch:https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lenn...
Hello Jon,Greetings from Ruckus!We understand since power outage you do not have internet access. Could you please help us below:1)Switch model and firmware ?2)Is there any amber light indication on switch? You can share the picture of front panel an...
