cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7450 - 802.1x vlans

rahul_chakravar
New Contributor III

I've put ports 1/1/1-1/1/5 Untagged and they're assigned to a vlan 10 that I created.

Now when i run the command,

dot1x enable ethernet 1/1/1, it errors out in:

Error - MAC-AUTH/Dot1x cannot be enabled on UNTAGGED port 1/1/1 on non-system default vlan.

Does that mean, I assign all 48 of my ports to default-vlan and then run the above command?

 

It sort of makes sense to me because if I've specified which ports are in which vlan, that's static vlan and I'd have to turn that off first before enabling dynamic vlan. Is that a correct assumption here?

 

1 ACCEPTED SOLUTION

BenBeck
Moderator
Moderator

Hey @rahul_chakravar 

Yes, that error is telling you the port needs to be in the default vlan. Please feel free to open a support case (see my signature) if you need help getting dot1x going. 

 

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

1 REPLY 1

BenBeck
Moderator
Moderator

Hey @rahul_chakravar 

Yes, that error is telling you the port needs to be in the default vlan. Please feel free to open a support case (see my signature) if you need help getting dot1x going. 

 

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us