RUCKUS ZoneDirector (ZD)

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

ZoneDirector

With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.

Forum Posts

Sorted by:

ASK the Pack

Assign 2 IPs to ZD3000 Controller on 10.2

Is it possible at all to assign an IP in 2 separate subnets on the ZoneDirector? Perhaps via command line?

How to have wireless clients on another subnet but access main lan gateway

Hi,Is it possible to have wireless clients get a different IP address range to our main LAN but still use the gateway on our main LAN. Would this be VLAN pooling? Our current LAN is say 192.168.0.1 -255 - 255.255.255.0 and the DHCP is handled by our...

r700 APs - 2.4 Ghz clients "Unauthorized"

I have ZD 9.8.3 build 58 and run a WLAN with mostly ZF 7762s that works fine with all clients old and new. Recently I've acquired some R700s and added them to the same WLAN. The R700s seem to only be able to connect 5 GHz clients (newer laptops and p...

Re-generate private key on ZD - issues?

I have a ZD 3000 and need to change the current private key length from 1024 (default) to 2048 in order to get a SSL Certificate. Does this affect existing users/WLAN configuration in any way (apart from the required ZD reboot) or is the change compl...

R730 Regularly disconnects from ZD1200

We carried an upgrade of the ZD1200 from version 10.3.x.x to 10.4.1.0.214 some of the R730 APs keep disconnecting from the ZD. We have to disable and reenable the switch on which the affected AP is connected before it will be back online.This is fru...

Related Self-Help

Find More Solutions