RUCKUS ZoneDirector (ZD)

|

ZoneDirector

With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.

Forum Posts

Sorted by:

ASK the Pack

ZoneDirector 1200 and Random Drops Outs

Currently, have 10 Ruckus R600 and a Zone Director 1200...We are an all-MAC shop and users are experiencing random dropouts (where they have to reconnect and disconnect) and not transitioning smoothly from AP to AP.Our vendor came in and installed a ...

L2 ACL (MAC) doesn't apply to AP immediatly

Hello,We're using ZD1200 with R310 AP.Same VLAN, MPLS network.However, I've got some issues ; I've created an Access List based on client MAC Address applied to a specific WLAN which worked correctly at start.But now, when I add a new MAC Address, I ...

Radius Authentication/Accounting Servers

Hello, I currently have an SSID configured in ZoneDirector 1200 to send RADIUS accounting information to an 'Accounting Server'. My question is, can I configure this SSID to send RADIUS accounting information to TWO accounting servers at the same tim...

802.1x authentication succeeds but still no connection

Hello, I have a working SSID that uses WPA2 802.1x. I have simply cloned this SSID and changed the ESSID. Users now try to connect to this SSID but fail continuously. I have looked on the Windows NPS 802.1x server and can see successful logins in the...

ZD1200 Latest Firmware (9.13) - Setup Wizard can't get past Management IP

New ZD1200. I believe it had 9.10 or 9.9 on it. Setup Wizard worked fine. Got on our network, downloaded the latest firmware, upgraded it (it lost its configuration - not a big deal), but now it won't get past the Management IP in the Setup Wizard.I'...

Related Self-Help

Find More Solutions