RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

how to do access control at application layer on vSZ-H/ZD 3000? L7 Application control on vSZ-h/ZD

Hi,We are looking to implement L7 Application control on ZD or vSZ platform(we have both in network). we would like to implement where a certain application ie hulu or netflix should work but only at certain bandwidth limit. I know there is a devic...

Layer 2 Access Policy Limitation

We have a vSZ-H running 3.4.0.0.976 and using L2 access policy in certain WLANs.What I see is that after the number of MAC addresses has reached 128 we can add no more in the list.Is there any way to increase the maximum number of MAC addresses suppo...

Migrating from ZD-1200 to Smartzone-100

Hello All,We are currently running ZD-1200 (9.13 firmware) with 20 R600 Accesspoints which ip were configured statically.we have bought smartzone-100 two numbers now and planning to migrate all the Accesspoints from ZD to SZ-100. I wants to know what...

Application based "rate limit" in Ruckus ZD-1200 , Smartzone-100

Hello All,We are using Ruckus ZD-1200 and 20 R600 Access points. Planned to configure rate-limiting for users based on "URL" or "Applications"., like youtube 2Mbps,facebook 1 Mbps.I know that there are the following options 1. Wlan based rate-limit 2...

Can I create 2-node vSZ cluster setup with each node having different VLANs.

I am creating 2 node vSZ cluster. Nodes will be put in two different sites. As per network architecture, VLANs are not span between sites. So in my setup management and control will have different VLAN IDs and different IP subnets while cluster i...

CommScope RUCKUS Community Forums

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

how to do access control at application layer on vSZ-H/ZD 3000? L7 Application control on vSZ-h/ZD

Layer 2 Access Policy Limitation

Migrating from ZD-1200 to Smartzone-100

Application based "rate limit" in Ruckus ZD-1200 , Smartzone-100

Can I create 2-node vSZ cluster setup with each node having different VLANs.

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

I'm Forgot admin Password for my SZ100

R550 connects to SZ but does not upgrade firmware

Slow downlink for the R650 registered in vSZ

System Operation

DHCP server on smartzone for wireless clients

SZ124 WLC Newest possible Firmeware Version for th...

I can't try to auth using chap for Test AAA server...

VSZ - Essential 3.6.1.0.227

SmartZone AP Issue

Remote syslog server