Changing the BSS rate and RSSI value only for particular group in SSID

[sujay]

We have configured the our configuration on zone based, if I make configuration changes in group based in wlan. Does it affect complete zone configuration.

[archana_bollu · Accepted solution]

Hi Sujay,

As I could see you need to know if config change on ap-group will change the config on zone.

Since we have the smart zone hierarchy as Zone>>ap-group>> AP specific, Hence if we make any changes on Zone will be applied to ap-group and ap-specific, also any change on AP-group will be applied on AP's mapped in that group and ap-specific config change is specific to only that AP but will not override ap-group or zone. Please find the below document for your reference for the same for resolution part https://support.ruckuswireless.com/articles/000009300

Regards,

Archana Bollu

[sujay · Accepted solution]

Hello @archana_bollu,

Thank you for your response. Based on our testing, we have discovered that it is not possible to override the SSID at the group level. The changes made to the SSID apply universally to all groups where it is mapped.

[Parik_MN]

Hello @sujay, 

Could you please elaborate your query? Perhaps sharing the screenshot of configuration would help answer your query.

Regards,

Parik

[sujay]

Hello @Parik_MN 

Actually for example assume that 'A' is an zone of smartzone where we have configured the wlans. under the 'A' we have sub folders "b", "c", "d", now as usual the b,c,d are sub groups of the A they will get configuration of the A. My question is if I change the configuration of the b group. will it change the complete c and d configuration

[archana_bollu · Accepted solution]

Hi Sujay,

As I could see you need to know if config change on ap-group will change the config on zone.

Since we have the smart zone hierarchy as Zone>>ap-group>> AP specific, Hence if we make any changes on Zone will be applied to ap-group and ap-specific, also any change on AP-group will be applied on AP's mapped in that group and ap-specific config change is specific to only that AP but will not override ap-group or zone. Please find the below document for your reference for the same for resolution part https://support.ruckuswireless.com/articles/000009300

Regards,

Archana Bollu

[sujay · Accepted solution]

Hello @archana_bollu,

Thank you for your response. Based on our testing, we have discovered that it is not possible to override the SSID at the group level. The changes made to the SSID apply universally to all groups where it is mapped.