Hi TMA,Thankyou for reaching us.You have issue with only 4 R500 AP's disconnection and other R500 AP's work fine on same site.May I know if you have any working R500 connected on same switch, where we have non-working disconnected AP?Please let us kn...
Hi @pluto09, Please find the below article to configure the AP registration rule and you could map new zone with 3.x firmware.WebUI of controller >> Network >> wireless >> AP settings >> AP registration >> create >> Select all paramaters and zone >> ...
Hi Sujay,Thankyou for the above. whenever we create an SSID initially on system level(universal) or zone or ap-group or ap-specific then we need to navigate to that level and modify the changes. Hence in your case, the SSID initially might be configu...
Hi Sujay,As I could see you need to know if config change on ap-group will change the config on zone.Since we have the smart zone hierarchy as Zone>>ap-group>> AP specific, Hence if we make any changes on Zone will be applied to ap-group and ap-speci...
