RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hello RUCKUS Lennar Homeowners, Greetings from RUCKUS! We’re glad to have you here! To make your experience smoother, we’ve created the RUCKUS Lennar Knowledge Base, a dedicated self-help section with step-by-step guides, solutions to common issues, ...
Welcome to your primary source for RUCKUS Lennar SmartHome Support! Before posting please review these suggestions. Please be sure to read the RUCKUS Community GuidelinesPlease be considerate and respectful. We understand you may be frustrated, but p...
Wifi is not showing up after the power outage in my home. The modem lights are not blinking as well.
After power outage, 1 of the 2 AP (R510) is not working. I have tried the Lennar documentation. Power ON/OFF of AP (plug-in/out of PoE). Tried to reset AP. Hard reset AP. It shows "Configure.Me-xxxxxx" SSID but when I try to connect through Unleashed...
The switch suddenly stop working. All the lights are off. I have tried to plug in and out many times, even trying the reset button. Unfortunately, the switch still cannot be power back on.
I have a switch that is failing to boot properly. I've tried reloading the Uboot, primary and secondary partitions via TFTP with new or updated code and get the same error during the boot sequence. Followed by the CPU Softlockup messages. Starting ke...
I’ve researched this already and found the solution but my issue is when trying to get the switch to reboot from the correct primary code SPS…., there is an issue getting the Kernel for the primary code and then the switch boots from the secondary co...
