Hello RUCKUS Lennar Homeowners, Greetings from RUCKUS! We’re glad to have you here! To make your experience smoother, we’ve created the RUCKUS Lennar Knowledge Base, a dedicated self-help section with step-by-step guides, solutions to common issues, ...
Welcome to your primary source for RUCKUS Lennar SmartHome Support! Before posting please review these suggestions. Please be sure to read the RUCKUS Community GuidelinesPlease be considerate and respectful. We understand you may be frustrated, but p...
We have out AP not working after power outage. I reset the switch, plugged out/in but still no change. I have checked the unleashed app and the switch is showing pending( pending-ip) state. Please help resolve this asap, thanks in advance.
Good morning,I have a Lennar home with an ICX7150-C12. It is configured in switch mode, and I have recently updated both primary and secondary to 08090k (in an attempt to fix my issue, which failed). It is hard to describe, but I will do my best. If ...
I just got a new ICX7150-c12p for replacement. I have three access points. After plugged in with the new switch, I can see that there are three recover.me wireless and one configure.me, and all access points are blinking green on 5G and 2.4G withou...
Similar to other posters, a power outage always causes issues for my ICX-7150-12CP and the two associated APs. I went through the manual reset of the switch but the amber lights just blinked continuously. Currently, the power light is green and the s...
Hello!Recently bought an existing home with existing equipment (router/switch (ICX 7150C) / AP (R510)) in the Lennar district. No password was provided so we did a hard reset on the AP.Please see multiple attempts and diagnosis below. Seem to be gett...
