Showing results for 
Search instead for 
Did you mean: 

Wifi for ruckus is freezing and slowing up after power outage

New Contributor

After a power outage the internet is now working slower than before. It freezes up. Was running fine before. We have reset entire Ruckus box by unplugging. Also reset the boxes on each of the 3 floors in my house and still nothing has worked. What can we do? I was going to go best buy and just another wifi extender. Any thoughts?


Hi @CK  ! 

I shared the wrong guide is this one since you know the IP address from your switch 


How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices"

Best Regards 

Fernando Vasquez 

View solution in original post



Hi @CK 

Seems like you are presetting the routing code issue due the power outage the switch starts running the wrong code 

As a solution for now you can connect to your local router via Ethernet or Wi-Fi and your are not going to have connectivity issues from there 

I will leave a short Guide about the normal setup for home users:

Where the main (white) box in your cabinet is the switch (ICX 7150-12CP)

And the boxes on the ceiling are the Wireless Access Points 

Most common Setups for Lennar homes users

We have 2 ways to access to the Switch 1- In a logical way via Ip address (IPs are logical addresses given by the local router) so we would have to track which IP is that of the Switch (that is using).

1-This guide show you how to track the IP address of the Switch

How to find my Ruckus “Devices IP address” using free applications

2-This guide show you how to access remotely to your switch

How to remotely access to 'ICX 7150-12P' or 'access points' "Network devices"

3-This guide contains the usernames and passwords if accessing on the switch ask you for that

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

4-Here are the steps how to fix the ‘routing code’ step by step (2 guides)

The other method to access to the switch is via console (cable access) in this case we need a USB type C to USB standard or Console cable Rj45 to USB. 

1-Here is the guide on how to access through the console and pre-install the necessary software

How to console in an ICX-7150-12c

2-Once you are log in you can follow up the Routing code guides to fix the issue that are on the step ‘4’

Best Regards 

Fernando Vasquez

I am having trouble following that. Is there a youtube video with step by step instructions or can i schedule someone to come out to take a look? The instructions are very difficult to follow. 

Those videos are for new set up. Mine is already configured. It is just now running slow. I am not able to follow amy of the steps because i do not have the configure me option since mine is already set up. Do you have any other suggestions for me? Other than just going ahead and getting a wifi extender