cancel
Showing results for 
Search instead for 
Did you mean: 

Wifi for ruckus is freezing and slowing up after power outage

CK
New Contributor

After a power outage the internet is now working slower than before. It freezes up. Was running fine before. We have reset entire Ruckus box by unplugging. Also reset the boxes on each of the 3 floors in my house and still nothing has worked. What can we do? I was going to go best buy and just another wifi extender. Any thoughts?

1 ACCEPTED SOLUTION

Hi @CK  ! 

I shared the wrong guide is this one since you know the IP address from your switch 

 

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices"

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

Best Regards 

Fernando Vasquez 

View solution in original post

68 REPLIES 68

Hi @CK  

Correct that should be the code that should be running  SPS08090d

Best Regards 

Fernando Vasquez 

Ok..so i did the next step as you instructed. I hit reset. Nothing has happened. I tried logging back in and still experiencing the lag. 

Hi @CK  

So the next step will be accessing via SSH or Telnet 

How to Access an ICX Switch remotely via SSH or Telnet

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-password...

How to Fix Routing 'code issues' on Lennar Home users

Enable

copy flash flash secondary 

Boot system flash secondary yes

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

If that does not work please get another console cable and tried the steps that peter mentioned to access by a console cable. 

Best Regards 

Fernando Vasquez 

CK_0-1668199336528.png

here is what happens when i try to run that.  I have tried this method before from your earlier one. 

 

Hi @CK  ! 

I shared the wrong guide is this one since you know the IP address from your switch 

 

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices"

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

Best Regards 

Fernando Vasquez