We have been dealing with slow wifi and determined that the ruckus unleashed R510 series routers are the issue. I tried to reset the system multiple times but the wifi is still not working properly. I would appreciate it if someone could reach out to me.
If there was a power outage most possible that switch start running the wrong code for that reason there are many symptoms
Smart devices like Amazon's Alexa not working as intended. Unleashed dashboard sometimes not showing as "Connected" on the Internet tab. Websites not loading. Several connectivity issues.
An identifier of this problem is that it comes out as Switch-Router in the unleashed dashboard.
There we are going to see 2 important things the
MAC address: Physical address of the device this never changes
The IP address : is a logical address assigned by your local router to the device (this can change and may not be the same as the one shown on the dashboard)
1- To fix this issue, we must identify the IP address of the switch 'currently'
-We can try the IP address that shows in the dashboard copy and paste it in the URL if that redirects you to the login page for the ICX-7150-C12P that is the correct one if not I will leave you a guide how to perform a IP scanner on your local network to identify the switch IP address.
How to find my Ruckus “Devices IP address” using free applications
3-Here is a quick guide to understand how to fix the 'routing code issue' but basically you need only need to run the following commands once you are on the command line 'CLI'
Note: Hit Enter to accept each command
copy flash flash secondary
boot system flash secondary yes
ICX7150-24P Router>enable (hit enter to accept the command) ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait : until the flash finished ) ICX7150-24P Router#boot system flash secondary yes ( hit enter to accept the command : the switch will reboot )
How to Fix Routing code issues on Lennar Home users