I bought a Lennar home from its original owner who didn't leave me any information about the Ruckus system. I saw that there was a network name and password inside the cabinet, but that network didn't show up on my wireless, neither with nor without AT&T internet plugged in. Trying to set up my own wifi through the unleashed app didn't work because the configure.me network never showed up. After doing a factory reset on the box (ICX 7150-C12P), the configure.me network still doesn't show up, but a recover.me network with an alphanumeric similar to the original password does appear; however, the cabinet password for the original network does not work on the recover.me, nor does the default admin password I saw in another thread. I don't know if I can console access, as I'm not exactly sure what cable is even required for that, but a straight cat5 cable between a laptop and the 7150 didn't seem to do anything, I could never get 192.168.0.1 to resolve to anything.
I need help setting up the factory reset 7150, and if that caused any issues with the 3x R510 WAPs in the house, then I also need help with getting those set up again as well.