11-12-2022 08:17 AM
After a power outage, the ruckus switch will no longer power the access points. I tried rebooting multiple times, and performed a reset. It will still not provide power.
11-12-2022 09:35 AM - edited 11-12-2022 09:43 AM
Hi @thead
Could you please copy and paste ' what you get through the console ' here also you can use a snipping tool to upload the screenshot here , you can 'upload images on the chat'
Best Regards
Fernando Vasquez
11-13-2022 05:50 AM
ICX7150-C12 Switch#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Feb 17 2017 at 16:03:13 labeled as SPS08060
(23946048 bytes) from Primary
SW: Version 08.0.60T211
Compressed Boot-Monitor Image size = 786944, Version:10.1.09T225 (mnz10109)
Compiled on Sat Feb 18 00:15:43 2017
HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
Serial #:FEK3224N0C1
Current License:
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 2 day(s) 11 hour(s) 13 minute(s) 59 second(s)
--More--, next page: Space, next line: Return key, quit: Control-c
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 2 day(s) 11 hour(s) 13 minute(s) 59 second(s)
The system started at 00:01:38 GMT+00 Sat Jan 01 2000
The system : started=cold start
ICX7150-C12 Switch#show inline power
Power Capacity: Total is 124000 mWatts. Current Free is 124000 mWatts.
Power Allocations: Requests Honored 0 times
Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
--------------------------------------------------------------------------
1/1/1 Off Off 0 0 n/a n/a 3 n/a
1/1/2 Off Off 0 0 n/a n/a 3 n/a
1/1/3 Off Off 0 0 n/a n/a 3 n/a
1/1/4 Off Off 0 0 n/a n/a 3 n/a
1/1/5 Off Off 0 0 n/a n/a 3 n/a
1/1/6 Off Off 0 0 n/a n/a 3 n/a
1/1/7 Off Off 0 0 n/a n/a 3 n/a
1/1/8 Off Off 0 0 n/a n/a 3 n/a
1/1/9 Off Off 0 0 n/a n/a 3 n/a
1/1/10 Off Off 0 0 n/a n/a 3 n/a
1/1/11 Off Off 0 0 n/a n/a 3 n/a
1/1/12 Off Off 0 0 n/a n/a 3 n/a
--------------------------------------------------------------------------
Total 0 0
--More--, next page: Space, next line: Return key, quit: Control-c
Power Supply Data On unit 1:
++++++++++++++++++
Power Supply Data:
++++++++++++++++++
Power Supply #1:
Max Curr: 2.2 Amps
Voltage: 54.0 Volts
Capacity: 124 Watts
POE Details Info. On Unit 1 :
General PoE Data:
+++++++++++++++++
Firmware
--More--, next page: Space, next line: Return key, quit: Control-c
11-13-2022 05:57 AM
General PoE Data:
+++++++++++++++++
Firmware
Version
----------------
01.8.7 Build 021
Hardware
Version
----------------
V2R2
Cumulative Port State Data:
+++++++++++++++++++++++++++
#Ports #Ports #Ports #Ports #Ports #Ports #Ports
Admin-On Admin-Off Oper-On Oper-Off Off-Denied Off-No-PD Off-Fault
-------------------------------------------------------------------------
0 12 0 12 0 0 0
Cumulative Port Power Data:
+++++++++++++++++++++++++++
#Ports #Ports #Ports Power Power
Pri: 1 Pri: 2 Pri: 3 Consumption Allocation
-----------------------------------------------
0 0 0 0.000 W 0.000 W
11-13-2022 07:13 AM
I was able to resolve
11-14-2022 09:02 AM
Great to hear that!
Please feel free to mark the post as resolved
Best regards
Sofia Gätjens |Technical Support Engineer