cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus Switch not powering access points

thead
New Contributor II

After a power outage, the ruckus switch will no longer power the access points. I tried rebooting multiple times, and performed a reset. It will still not provide power.

9 REPLIES 9

Hi @thead 

Could you please copy and paste  ' what you get through the console '  here  also you can use a snipping tool to upload the screenshot here ,  you can 'upload images on the chat' 

Best Regards

Fernando Vasquez

thead
New Contributor II

ICX7150-C12 Switch#show version

  Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.

    UNIT 1: compiled on Feb 17 2017 at 16:03:13 labeled as SPS08060

      (23946048 bytes) from Primary

        SW: Version 08.0.60T211

      Compressed Boot-Monitor Image size = 786944, Version:10.1.09T225 (mnz10109)

       Compiled on Sat Feb 18 00:15:43 2017

 

  HW: Stackable ICX7150-C12-POE

==========================================================================

UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module

      Serial  #:FEK3224N0C1

      Current License:    

      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0

==========================================================================

UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8192 KB boot flash memory

2048 MB code flash memory

1024 MB DRAM

STACKID 1  system uptime is 2 day(s) 11 hour(s) 13 minute(s) 59 second(s)

--More--, next page: Space, next line: Return key, quit: Control-c

 

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8192 KB boot flash memory

2048 MB code flash memory

1024 MB DRAM

STACKID 1  system uptime is 2 day(s) 11 hour(s) 13 minute(s) 59 second(s)

The system started at 00:01:38 GMT+00 Sat Jan 01 2000             

 

The system : started=cold start   

 

ICX7150-C12 Switch#show inline power

 

Power Capacity:         Total is 124000 mWatts. Current Free is 124000 mWatts.

 

Power Allocations:      Requests Honored 0 times

 

 

Port   Admin   Oper    ---Power(mWatts)---  PD Type  PD Class  Pri  Fault/

        State   State   Consumed  Allocated                          Error

--------------------------------------------------------------------------

  1/1/1 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/2 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/3 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/4 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/5 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/6 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/7 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/8 Off     Off            0          0  n/a      n/a         3  n/a

  1/1/9 Off     Off            0          0  n/a      n/a         3  n/a

1/1/10 Off     Off            0          0  n/a      n/a         3  n/a

1/1/11 Off     Off            0          0  n/a      n/a         3  n/a

1/1/12 Off     Off            0          0  n/a      n/a         3  n/a

--------------------------------------------------------------------------

Total                         0          0

--More--, next page: Space, next line: Return key, quit: Control-c

 

Power Supply Data On unit 1:

++++++++++++++++++

 

 

 

Power Supply Data:

++++++++++++++++++

 

Power Supply #1:

        Max Curr:       2.2 Amps

        Voltage:        54.0 Volts

        Capacity:       124 Watts

 

 

POE Details Info. On Unit 1 :

 

 

General PoE Data:

+++++++++++++++++

 

Firmware

--More--, next page: Space, next line: Return key, quit: Control-c

thead
New Contributor II

General PoE Data:

+++++++++++++++++

 

Firmware

Version                                                           

----------------

01.8.7 Build 021

 

Hardware

Version

----------------

V2R2

 

 

 

Cumulative Port State Data:

+++++++++++++++++++++++++++

 

#Ports    #Ports     #Ports   #Ports    #Ports       #Ports     #Ports

Admin-On  Admin-Off  Oper-On  Oper-Off  Off-Denied   Off-No-PD  Off-Fault

-------------------------------------------------------------------------

0         12         0        12        0            0          0        

 

 

 

Cumulative Port Power Data:

+++++++++++++++++++++++++++

                                                                  

#Ports  #Ports  #Ports        Power       Power

Pri: 1  Pri: 2  Pri: 3  Consumption  Allocation

-----------------------------------------------

0       0       0           0.000 W     0.000 W

thead
New Contributor II

I was able to resolve

Great to hear that! 

Please feel free to mark the post as resolved 

Best regards 

Sofia Gätjens |Technical Support Engineer