Ruckus R510 Access Point - No Power

[rhrout]

My Ruckus R510 Access Point (AP) has no power.

To date I have:

  - Taken down the AP and connected it directly to the Ruckus ICX 7150 POE port. I still had no poer.

  - Unplugged the 7150 and plugged it back in. The AP still has no power.

Similar posts in the community included showing screen shots with no background on how or where these screen shots came from andYou Tube videos with no sound. (Note: I played other videos that had sound so it's not my computer's fault).

[Jayavidhya]

Hi @rhrout 

Greetings of the day,

For further troubleshooting please let us know the LED status of the switch  using the below guide.

RUCKUS LED Lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community
 

[rhrout]

This is a photo of my switch.

SYST: Yellow LED.

PWR: Green LED.

No other LED lit.

[Jayavidhya]

Hi @rhrout 

Thanks for the response.

Based on the description it seems that the switch has one green and one yellow light, which means that the switch is stuck in boot mode.

1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

2-Please try to press the reset button using a paper click or a small stick 

1.  Remove power from the switch.
2. Press and hold the Reset button while applying power to the switch.
3. After all the system LEDs flash amber, release the Reset button.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4

If this step doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

If the resetting process doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-re...

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[rhrout]

All these instructions are confusing to a novice user.

How do you connect a Windows-based laptop with the ICX7150 in order to:

  - Upgrade a Switch ICX7150-C12P via TFTP, or

  -Upgrade a switch via Web GUI

thanks,

Bob Routier

rhriout@hotmail.com