- Taken down the AP and connected it directly to the Ruckus ICX 7150 POE port. I still had no poer.
- Unplugged the 7150 and plugged it back in. The AP still has no power.
Similar posts in the community included showing screen shots with no background on how or where these screen shots came from andYou Tube videos with no sound. (Note: I played other videos that had sound so it's not my computer's fault).
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive