RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
08-05-2023 08:02 AM
After a power outage, my Ruckus router AIR light is not blinking and nor not on. The other lights from the router are on. I have tried numerous attempts to unplug, reset and even disconnect the router from the wall and connect it again. I cannot access my network name that was created for the access point, but i can access the Frontier router. How can I reconnect to my old router name? I am having trouble accessing unleashed as well.
I have a Ruckus R320 Series Unleashed
Solved! Go to Solution.
08-14-2023 11:35 AM
Hi @Ant
Please try to access the switch via console using the below guide and share the output of the following commands.
How to console in the ICX-7150-C12P:
enable
Show flash
Show version
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
08-14-2023 11:03 AM
Hi @Ant
Yes, it is correct. Now please enter the following commands and share the output:
enable
Show flash
Show version
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
08-14-2023 11:17 AM
i did, but nothing happened. when i logged in, it did NOT show it saying: ICX7150 -C12P
08-14-2023 11:35 AM
Hi @Ant
Please try to access the switch via console using the below guide and share the output of the following commands.
How to console in the ICX-7150-C12P:
enable
Show flash
Show version
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
08-14-2023 12:44 PM
no, its not an accepted solution. i'm getting this in the other one
08-14-2023 03:52 PM
i have been at this for a week w/out wireless internet and I need someoen to call and go in my computer to fix this please. I am behind work and working from the closet where the switch is at.
