cancel
Showing results for 
Search instead for 
Did you mean: 

No longer able to view the Ruckus connections

Rj007
New Contributor

After I reset my netgear modem router (for the first time after about 2 years), I was no longer able to view the switch (ICX 7150- C12P) connection/name in the list of Wi-Fi connections. I restarted the switch and also let the Comcast technician (onsite) try connect to it. But he was not able to receive any signal from the switch either.
 
could I get some guidance on how to fix this? ( I am Lennar home owner in Covington )

5 REPLIES 5

Jayavidhya
Moderator
Moderator

Hi @Rj007 

 

Greetings of the day,

 

For better understanding of the issue,

1. Please let me know whether you have faced any recent power outage or not.

2. Are the Access points getting power?

3. If yes can you confirm what is the status of the next light in the Access Point, using the next guide to provide the details?

(One of the APs should have the CTL LED lit and it should be green & solid. This indicates the Unleashed Master.)

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

4. Also please check the following guide to make sure is the right devices and the connections 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

https://www.youtube.com/watch?v=vFD_ByQWGH0
 

Best regards,

Jayavidhya

Lennar Home Community
 

Hello- Thank you for the update and reference guides (the first link on point 4 seems to be not working). I did remove the power (not power outage) to the device once and reconnected while I was trying to troubleshoot it to get the connectivity back. 

Going through the video, I did connect the ethernet cable from the cable modem router to the correct PoE port. Now I am able to view the Switch on my wifi devices and also am able to use the Ruckus unleashed app. 

However the bandwidth speed is just 8 MBPS (my network should be capped at 1gbps) which is not what I was getting before. Checking this further, I have two APs and did check them both. One of AP had solid green on power, CTL, 2.5g & 5g and no light on AIR. 

On the second AP, the power is solid red (for couple of hours now, i.e. from the time I have been monitoring it) and rest of the lights are off. Could you please let me know if this needs to be reset or something else to bring it up and if that is the cause of the reduced speed? 

Also, in the unleash app, the second Ruckus AP shows up as Offline (together with the above observation, seems like it is stuck) and also noticed that the ICX7150-C12-Router is disconnected (not sure if this is somehow related as well). 

 

Hi @Rj007

Greetings!!!

Thank you for the response and detailed information you shared.

From the description, I could understand that your Internet connection with the RUCKUS setup is unstable.

Could you also please let us know if there was any power outage or power spike recently?

We suggest you confirm the speed transmitted by your Internet Service Provider (ISP). You could check the ISP connectivity from the Router, maybe with Local Router Wi-Fi or by an Ethernet cable from the Router a laptop, or a PC. (Please refer to the below pictures). Please compare the speed tests from the ISP Router and from the Switch.

 

Imran_ruckus_0-1677801110208.png

 

And could you please share screenshots of both AP’s information from the Unleashed as shown in the below screenshot as a example.

Imran_ruckus_1-1677801110218.png

  

Please try to factory reset the AP with the Red light as described below:

IMPORTANT NOTE: As you have multiple Access Points (APs) in your house, please make sure you only keep the affected AP ON and reset the same. Please go to the Ruckus Switch (located in the panel) and disconnect from its ports the Ethernet cables of the Working Access Point, except the one that you are going to work with (non-working).

Please read the following guide carefully: 

Physical Factory Reset of RUCKUS Access Point:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Ac...

Ruckus Unleashed Set-up using your Mobile:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-Unleashed-Set-up-usin...

Ruckus Unleashed Set-up using Web:

https://www.youtube.com/watch?v=j8I5aVwMNMg

 

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

Lennar Home Community.

thank you for the detailed instructions. I have recently tried to troubleshoot the issue with my netgear modem router combo and powered off the switch in the process. I think it just got stuck during the process.

 

before I proceeded with the reset, I powered off the switch again and waited for some time and restarted it.. this time the APs picked up the power and boot process went through successfully. Both are working okay now and with decent speed. We can close this thread for now. 
thank you for all your support!