Solved: RUCKUS Forums - Re: ICX 7150-C12P Switch Stopped Working

c319917 · ‎08-26-2025

The switch stopped working after 7 years. There were no lights from the switch, nor from the router on the ceiling. I read the posts from other owners with similar problems. I unplugged the power cord and plugged back in twice, but still there were no lights. Please help.

Imran_ruckus · ‎08-26-2025

Hi @c319917

Thank you for the response and the update.

Great!!! Glad to know that the issue is now resolved. Now the RUCKUS Switch and AP have normal light status.

We appreciate your time and patience on this case.

Thank you again for contacting RUCKUS Lennar Home Community, and feel free to contact us for future queries.

Have a great day ahead!!!

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

View solution in original post

c319917 · ‎09-08-2025

Hi Pinky,

Thank you kindly for the follow up.

The switch is still working fine. I will definitely go back to this post if I have another problem with any Ruckus equipment. This is an excellent support.

Best regards,

View solution in original post

pinky_ruckus · ‎09-23-2025

Hi @c319917 ,

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up even after connecting it to working power outlet, and when plugged in, all lights are off. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

View solution in original post

Imran_ruckus · ‎08-26-2025

Hi @c319917

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that your RUCKUS ICX-7150-C12P Switch is not working.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

I recommend attempting a physical factory reset multiple times, as detailed in the RUCKUS Lennar Knowledge Base self-help article and video available at the link below:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Process-for-performing-a-phy...

Please let me know the outcome once you’ve tried this.

Thank you once again for your patience.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

c319917 · ‎08-26-2025

I tried the hard reset, here is the picture of the lights after the reset, noted that the status lights are not on.

Thank you very much.

Imran_ruckus · ‎08-26-2025

Hi @c319917

Thank you for your response and the information provided.

Based on the picture you shared, the status of your RUCKUS ICX-7150-C12P Switch appears to be normal.

Could you please confirm the light status on your RUCKUS Access Points (APs) mounted on the ceiling? (Refer to the picture below for guidance)

Thank you once again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

c319917 · ‎08-26-2025