cancel
Showing results for 
Search instead for 
Did you mean: 

Connectivity issue with RUCKUS

Jyothik16
New Contributor III

I have been using RUCKUS for more than three years and never had a any issues. Past from few days I challenges to access Internet through RUCKUS

appreciate if you could help me to resolve this.

 

Jyothi

2 ACCEPTED SOLUTIONS

Hi @Jyothik16 

Thank you for the response and the detailed information you shared. 

This issue is because your switch is running on the Routing code (SPR). The Switch should run on the Switching code (SPS) to avoid these issues for Lennar home users. Due to a power outage/power spike, the Switch boots up on the other partition which may be running on a ‘Routing Code’ results in causing this issue.

As I can see from the output you shared, your Switch is booted up on the secondary partition which is running on Routing code (SPR) as highlighted in the below screenshot. 

Please Enter the below commands in CLI to fix this issue:

Note: Hit Enter to accept each command 

enable

copy flash flash secondary 

boot system flash secondary yes 

Example: 

VIDEO LINK AS REFERENCEhttps://www.youtube.com/watch?v=Eem1IBgYaWc

ICX7150-24P Router>enable (hit enter to accept the command) 
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished) 
ICX7150-24P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot)

We suggest upgrading your switch to the latest stable version to avoid this issue in the future. Your Switch is on an older version that is 08080d. Please let us know once you complete the above process to assist you with the Upgrade of the Switch.

Please let me know if you have any queries in this regard.

NOTE: Please feel free to mark the post as ACCEPTED SOLUTIONS.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

View solution in original post

Seems like it’s stable. In the morning when I looked at RUCKUS upstairs it showed all red lights but now it doesn’t.

Thank you for all you timely response and guidance to resolve the issue.

Jyothi

View solution in original post

34 REPLIES 34

Jyothik16_0-1693872170161.png

 

Jyothik16
New Contributor III

This is screen once I open IP address in Putty

Hi @Jyothik16 

Thank you for the response and the information you shared.

Could you please try to log into the Switch from a web browser?

You should see the Switch Dashboard as shown in the below screenshot to confirm it’s a Switch IP Address. 

Please try to login on web browser and let me know if you have any issues.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

I tried login using we browser and its asking username and password. I tried the combination and it doesn't login 

Jyothik16
New Contributor III

why do I have two different IP address. While following your shared procedure it gave me different IP address. and while I log in RUCKUS Unleashed app it's different IP address