Hi @Jevytsee168
Thanks for your response,
Please share the screenshot of the error you are getting while following the steps.
Here is where you can upload the image/photo :
you can also drag it to the chat.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
Hi @Jevytsee168
Sorry for the inconvenience.
Please let us know whether you have tried accessing the switch CLI using the below guide or not. If not please try to access the switch CLI and enter the following commands mentioned below.
There are Two ways to get access to the switch.
- I) By IP Address of the Switch OR
- II) By Console Access to the Switch
- By IP address: To fix this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P
I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.
How to find my Ruckus “Devices IP address” using free applications:
Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”
How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":
If you can access the Command line should look like this:
ICX7150-C12 Router>
Once you are done with this steps please let us know. Then we will instruct on wat to do next.
If you are struggling in any of the steps please share that screenshot where you got stuck using the below step.
Here is where you can upload the image/photo :
you can also drag it to the chat.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
What next?
