cancel
Showing results for 
Search instead for 
Did you mean: 

Access points no power

Jevytsee168
New Contributor III

My access points do not have power 

1 ACCEPTED SOLUTION
31 REPLIES 31

it will not let me add photos

 

CBED2BE7-A814-4C1E-B804-645A5951A333.jpeg5854884A-03DA-410A-A63C-14A55433992E.jpeg

Hi @Jevytsee168 

 

Thanks for your response,

 

Based on the images you have shared it seems like the switch has green lights on PWR and SYS on it which means that the switch is in normal state.

 

To find the root cause of the issue we need to take console access to the switch to verify whether the switch is able to transfer the power via 12 ports.

 

To check this, first, we have to get access to the switch, and there are Two ways to get access to the switch.

  1. I) By IP Address of the Switch OR
  2. II) By Console Access to the Switch

 

  1. By IP address: To fix this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily. 

 

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Device...

 

Once we identify the IP address of the switch proceed to access remotely to the device “Command Line” 

 

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

 

If you can access the Command line should look like this:

ICX7150-C12 Router>

 

  1. Now please perform the following commands and share the output:

enable

Show version

Show inline power

Show inline power detail

 

  1. By Console access: If access via IP address is not possible here is a guide on how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard or Console cable Rj45 to USB. 

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

 

Once you are logged in to the ICX-7150-C12P please follow up the same steps that are on point '2'

 

Please let me know if you have any queries in this regard.

 


Best regards,

Jayavidhya

Lennar Home Community
 

  • As

A